SIPROTEC 7SJ66, numerical protection relay siemens, numerical distance protection relay, SIPROTEC 4 devices, reyrolle motor protection relay SIPROTEC 7SJ66 numerical relay

ReliServ Solution

About ReliServ Solution

We at ReliServ Solution believe, "A good product and reliable services bring high profitability"

Test Data

ReliServ Solution

The SIPROTEC 7SJ66 unit is a numerical protection, control, and monitoring device. SIPROTEC 7SJ66 is featuring the "flexible protection functions". Up to 20 protection functions can be added according to individual requirements. Thus, for example, a rate-of-frequency-change protection or reverse power protection can be implemented.

The relay provides control of the circuit-breaker, further switching devices and automation functions. The integrated Graphical logic editor (CFC) allows the user to implement its own functions, e. g. for the automation of switchgear (interlocking). The communication interfaces support the easy integration into modern communication networks.
Protection Functions
  • Overcurrent protection
  • Directional overcurrent protection
  • Sensitive directional ground-fault detection
  • Displacement voltage
  • Intermittent ground-fault protection
  • Directional intermittent ground fault protect
  • High-impedance restricted ground fault
  • Inrush Restraint
  • Motor protection
  • Overload protection
  • Temperature monitoring
  • Under-/overvoltage protection
  • Under-/overfrequency protection
  • Rate-of-frequency-change protection
  • Power protection (e.g. reverse, factor)
  • Undervoltage controlled reactive power protection
  • Breaker failure protection
  • Negative-sequence protection
  • Phase-sequence monitoring
  • Synchro-check
  • Auto-reclosure
  • Fault locator
  • Lockout
  • Auto-reclosure
Control functions/programmable logic
  • Commands for control of CB and of isolators
  • Graphical visualization of switch positions
  • Control via keyboard, binary inputs, DIGSI 4 or SCADA system
  • User-defined logic with CFC (e.g. interlocking)
Monitoring functions
  • Operational measured values V, I, f
  • Energy metering values Wp,Wq
  • Circuit-breaker wear monitoring
  • Slave pointer
  • Trip circuit supervision
  • Fuse failure monitor
  • 8 oscillographic fault records
  • Motor statistics
Communication interfaces
  • System interface protocols: IEC 60870-5-103, IEC 61850, Modbus RTU, DNP3
  • Electrical and optical interface
  • RSTP (Redundancy Protocol for Ethernet)
  • Service interface for DIGSI 4 or RTD-Box
  • Front USB interface for DIGSI 4
  • Time synchronization via IRIG B, DCF77
Hardware
  • Spring-type terminals
  • 4 current transformers
  • 4 voltage transformers
  • 16/22/36 binary inputs
  • 7/10/23 output relays
  • Graphic or 8 line display

Reliserv © . sitemap | log in