SIPROTEC 7SJ81, siemens mumerical relay, SIEMENS Numerical Relays manual, SIEMENS make Numerical Relay, numerical protection relay siemens SIPROTEC 7SJ81 numerical relay

ReliServ Solution

About ReliServ Solution

We at ReliServ Solution believe, "A good product and reliable services bring high profitability"

Test Data

ReliServ Solution

The SIPROTEC Compact 7SJ81 provides 4 low-power current transformer inputs and optionally 3 low-power voltage transformer inputs. With the same low-power current transformer (LPCT) a wide range of primary rated line currents can be covered. Objects with rated currents in the range from 20 A to 2500 A can be protected when using low-power current transformers.
The following low-power current transformer ratios are suitable for the following primary current operating ranges
Highlights
  • 300 A/225 mV for a primary operating current range of 60 A to 630 A
  • 600 A/225 mV for a primary operating current range of 120 A to 1250 A
  • 1250 A/225 mV for a primary operating current range of 250 A to 2500 A
  • 100 A/225 mV for a primary operating current range of 20 A to 200 A
SIPROTEC 7SJ81 is a multi-functional motor protection relay. It is designed for the protection of asynchronous motors of all sizes. The relays have all the functionality to be applied to a backup relay to a transformer differential relay.

The relay provides numerous functions to respond flexibly to the system requirements and to deploy the invested capital economically. Examples for this are exchangeable interfaces, flexible protection functions and the integrated automation level (CFC). Freely assignable LEDs and a six-line display ensure a unique and clear display of the process states. In combination with up to 9 function keys, the operating personnel can react quickly and safely in any situation. This guarantees a high operational reliability.
Highlights
  • Inputs for Low power CTs and VTs according to IEC 61869-6 (formerly IEC 60044-7 and IEC 60044-8)
  • Removable terminal blocks
  • Binary input thresholds settable using DIGSI (3 stages)
  • 9 programmable function keys
  • 6-line display
  • Buffer battery exchangeable from the front
  • USB front port
  • 2 additional communication ports
  • integrated switch for low-cost and redundant optical Ethernet rings
  • Ethernet redundancy protocols RSTP, PRP and HSR for highest availability
  • Relay-to-relay communication through Ethernet with IEC 61850 GOOSE
  • Millisecond-accurate time synchronization through Ethernet with SNTP
The SIPROTEC Compact 7SJ81 relays can be used for line/feeder protection of high and medium-voltage networks with grounded, low-resistance grounded isolated or a compensated neutral point. The relays have all the functionality to be applied to a backup relay to a transformer differential relay.

The SIPROTEC Compact 7SJ81 offers the highest reliability at major functionality by the synergy of reliable algorithms with newly developed hardware. The reliability is proven by the experience in the field of almost 1,000,000 SIPROTEC devices.

The relay provides numerous functions to respond flexibly to the system requirements and to deploy the invested capital economically. Examples for this are exchangeable interfaces, flexible protection functions and the integrated automation level (CFC). Freely assignable LEDs and a six-line display ensure a unique and clear display of the process states. In combination with up to 9 function keys, the operating personnel can react quickly and safely in any situation. This guarantees a high operational reliability.
Control functions/programmable logic
  • Commands for the ctrl. of CB, disconnect switches (isolators/isolating switches)
  • Control through keyboard, binary inputs, DIGSI 4 or SCADA system
  • User-defined PLC logic with CFC (e.g. interlocking)
Monitoring functions
  • Operational measured values V, I, f
  • Energy metering valuesWp,Wq
  • Circuit-breaker wear monitoring
  • Minimum and maximum values
  • Trip circuit supervision
  • Fast measuring voltage failure “fuse-failure-monitor”
  • 8 oscillographic fault records
Communication interfaces
  • System/service interface
    • IEC 61850 Edition 1 and 2
    • IEC 60870-5-103 and IEC 60870-5-104
    • PROFIBUS-DP
    • DNP 3.0
    • MODBUS RTU
    • DNP3 TCP
    • PROFINET
    • Ethernet redundancy protocols RSTP,PRP and HSR
  • Ethernet interface for DIGSI 4 and extension up to two SICAM I/O-Units 7XV5673
  • USB front interface for DIGSI 4
Hardware
  • 4 current transformers
  • 0/3 voltage transformers
  • 3/7 binary inputs (thresholds configurable using software)
  • 5/8 binary outputs (2 changeover/Form C contacts)
  • 1 life contact
  • Pluggable current and voltage terminals

All rights reserved © . sitemap | log in